R and P Carriages 7000# Tandem Axle Spring Hanger Kit

Fits 1- 3/4″ wide Springs (used on 2,000#, 3,500#, 5,200#, 6,000# and 7,000# Axles)
When used with “standard 25.25″ eye to eye leaf springs, 1 3/4″ wide, brackets should be installed 29.25” center to center on your frame
Spring hangers are meant to be welded on, and may or may not include extra 2 holes in the base.

This Is A Entire Spring Hanger Kit For tandem Trailer Axle Suits 1- 3/four” wide Springs (used on 2,000#, 3,500#, 5,2 hundred#, 6,000# and 7,000# Axles) Set Comprises: Rear Hangers – 1 half” To Bolt Hollow TWO Middle Hangers – 2 half” To Bolt Hollow Entrance Hangers – 1 half” To Bolt Hollow Eight Shackle straps 2.6″ Fourteen Bolts nine/sixteen” x 3 Fourteen Locking Hex nuts Equalizers – 7.75 bolt centers Notes: Now not for “slipper springs” (bolt in a single finish simplest, different finish simply slips) While used with “same old 25.25″ eye to eye leaf springs, 1 3/four” wide, brackets must be put in 29.25″ Middle to Middle in your body. Spring hangers are supposed to be welded on, and would possibly or would possibly not come with additional 2 holes within the base.
Suits 1- 3/four” wide Springs (used on 2,000#, 3,500#, 5,2 hundred#, 6,000# and 7,000# Axles)
While used with “same old 25.25″ eye to eye leaf springs, 1 3/four” wide, brackets must be put in 29.25″ Middle to Middle in your body
Spring hangers are supposed to be welded on, and would possibly or would possibly not come with additional 2 holes within the base.

Reviews

There are no reviews yet.

Be the first to review “R and P Carriages 7000# Tandem Axle Spring Hanger Kit”

Your email address will not be published. Required fields are marked *