Sale!

EPX10000 metal detector equipment remote digital frequency synthesis radar finder scanner Gold Silver Copper Lron Nit Gem P G hunter kit underground Metal gold detector

Inspection depth range: 5-50m; Range of detection100-1000m
Select the metal type: Gold P.G, SILVER ,COPPER,LRON ,NIT Gem.Rechargeable battery:8 hours of continuous work
Digital frequency synthesis X20PLL,automatic frequency stabilizer,0.1MHz

Scanner keep watch over installation Note: Before the day by day operation, the battery should be fully charged! If you don’t charge it, the EPX10000 would possibly go flawed.

If bizarre , this can be the first time warning that the battery power is too low and should be charged. If the battery power is charged an entire night,

after that, the battery remains to be no power, you want to interchange the battery or charger, or AC power outlet without electricity.

If the battery is charged,but it isn’t full of power,you can also want to replace the built-in battery. A new fully charged battery can let EPX10000 continue to work about eight hours.

Before turning at the scanner, put the EPX10000 transmitter at the ground, the sensor antenna is hooked up to the corresponding jacks of the transmitter.

When open the transmitter,never plug the sensor, if doing it, it’s going to cause damage to the machine. Up to now used EPX10000 scan,first make the entire essential connections.

1.The sensor is hooked up to the scanner testing (+) testing (-) at the jack, insert the probe of sensor on the planet

2.The transmit antenna signal transmission is mounted at the corresponding interface

3. with the power key is turned “On / Off” knob, turn at the power. At the moment, within the LCD area, power indicator,horizontal trmming,longitudinal trmming indicator lights.

4. At the moment, EPX10000 is scanning all selected element . Before starting the detection process, please let it work 3-5 minutes, as a way to be briefly explained later.

5.after the end of the operation, needless to say to show off EPX10000. For ease to make use of,the instrument requires the usage of a small battery charger is hooked up to the power line charg instrument.
Inspection depth range: 5-50m; Range of detection100-1000m
Make a selection the metal type: Gold P.G, SILVER ,COPPER,LRON ,NIT Gem.Rechargeable battery:8 hours of continuous work
Digital frequency synthesis X20PLL,automatic frequency stabilizer,0.1MHz
Radar Scans LED Panel,Color LCD display,a resolution of 480 320 pixels
16 bit processor speed,40MIPS -16MHz;32 bit DSS synthesis chip,wave from output

Reviews

There are no reviews yet.

Be the first to review “EPX10000 metal detector equipment remote digital frequency synthesis radar finder scanner Gold Silver Copper Lron Nit Gem P G hunter kit underground Metal gold detector”

Your email address will not be published. Required fields are marked *